Cabrio GL L4-2.0L (ABA) (2001)
Axle Beam: Service and Repair
Rear Axle Beam Assembly Overview
Rear Axle Beam Assembly Overview
Note:
^Do not weld or straighten axle beam.
^Always replace self-locking nuts.
1-Wheel bolt
^
120 Nm (89 ft lb)
2-Screw
3-Brake disc
4-Dust cap
^
Always replace
Note:
A perfect seal is only achieved using a new dust cap. Only then is optimum function and long service life guaranteed.
5-Self-locking 12-point nut
^
175 Nm (129 ft lb)
^
Always replace
6-Wheel hub with wheel bearings
Note:
^
Wheel bearing/hub are installed to gather in housing.
^
Wheel bearing/hub unit is maintenance and adjustment free. Adjusting and servicing are not possible!
7-Bolt
^
60 Nm (44 ft lb)
^
Always replace
8-Splash plate
9-Bracket, parking brake cable
10-Parking brake cable
11-Self-locking nut
^
80 Nm (59 ft lb)
^
Always replace