Cabrio GL L4-2.0L (ABA) (2001)
Fig. 3 Spring washer on inner joint, installation position
1. Spring washer
Fig. 4 Spring washer and thrust washer joint outer joint, installation position
1. Spring washer
2. Thrust washer
Fig. 5 Inner CV joint, pressing on
-
Press CV joint on to stop.
-
Insert circlip.
Note:
Chamfer on ball hub inner diameter (splines) faces contact shoulder on axle shaft.
Fig. 6 CV joint boot (left axle), installation position
Dimension -a- = 17 mm (0.67 inch)
Note:
Before installing boot mark position, dimension -a-, (for example: paint or adhesive tape). Do not damage paint surface.