Cabrio GL L4-2.0L (ABA) (2001)
-
Adjust door window to door-/side window seal - arrows B -
-
Position adjusting wedge into center position (connecting with clamping bracket at bottom), and tighten bolt - 2 - tightening torque: 10 Nm.
Window height adjustment, front
-
Crank window but not completely (50 mm under upper window level - better stabilization).
-
Adjust window at front height adjustment using Torx socket wrench VAS 3271 until there is no play, when doing this move window in direction of
- arrow -.
Adjusting window to B-pillar.