Cabrio GLX L4-2.0L (ABA) (2001)
Removing
- Using screwdriver, carefully pry off speaker cover.
- Remove four screws and pull speaker from side panel.
- Disconnect speaker harness connector.
Installing
- Install in reverse order of removal noting installation marks on speaker.
- Install speaker cover according to curvature of side panel.
Right Front Tweeter -R22-, Removing and Installing
Right front tweeter -R22-, removing and installing
Removing
- Using screwdriver, carefully pry up speaker cover (arrows).
- Carefully pry out tweeter mounting base.
- Remove connector.
Installing
- Install in reverse order of removal noting installation marks on speaker.
Left Front Tweeter -R20-, Removing and Installing
Left front tweeter -R20-, removing and installing