Cabrio GLX L4-2.0L (ABA) (2001)
Trim Panel: Service and Repair
A-Pillar Trim
A-pillar Trim, Removing And Installing
Removing
-
Remove windshield trim.
-
Remove cap - 2 - and Remove screw - 1 -.
-
Pull trim upward off A-pillar.
Installing
-
Unclip clips - 3 - from A-pillar and insert into trim.
-
Insert expanding clip - 4 - into A-pillar mounting hole.
-
Install A-pillar trim, make sure seal is properly seated.