Cabrio GLX L4-2.0L (ABA) (2001)
Convertible Top Weatherstrip: Service and Repair
Seal For Windshield Frame, Removing And Installing
Removing
-
Pry out interior light using a screw driver.
-
Disconnect harness connector.
-
Remove sun visor - 1 - and sun visor mount - 2 -
-
Rotate sun visor mount - 2 - 90 ° and remove.
-
Disconnect harness connectors, if installed.
-
Remove trim for windshield frame.
-
Remove screws - 2 -, compress retaining tabs - arrows - for mounts - 1 - and remove mounts - 1 -.
-
Pull seal - 3 - for windshield frame out of retaining rails - 4 - (seal is placed underneath with butyl strip in upper area of windshield frame).
Installing