Cabrio GLX L4-2.0L (ABA) (2001)
-
Insert brake pedal depressor VAG 1869/2 or equivalent.
-
Activate brake pedal booster with brake pedal depressor.
-
Connect bleeder bottle hose to bleed screw of left front brake caliper and open bleed screw.
-
Close left front bleed screw.
-
Release ABS control module connector (arrow -1-) and remove (arrow -2-).
-
Place plastic covering under control module and hydraulic unit. Do not use rags.
Note:
Do not let brake fluid enter electrical connectors.
-
Disconnect brake lines from hydraulic unit to brake master cylinder (arrows) and suspend with wire.
-
Disconnect remaining brake lines from hydraulic unit.
-
Seal brake lines and threaded holes (arrows) using plugs from repair kit, Part No. 1 H0 698 311 A.
-
Remove bolts from bracket for hydraulic unit (arrows).
-
Remove hydraulic unit with control module.
ABS Control Module, Removing From Hydraulic Unit
-
Disconnect electrical connector for hydraulic pump motor from control module.