Cabrio GLX L4-2.0L (ABA) (2001)
Continuation of check when display approx. -46 degree C:
-
Pull 4 pin connector -1- off coolant temperature sensor -G62- -2-.
-
Bridge connector contacts 1+3 using auxiliary cables from VAG 1594 and observe display.
If display jumps to approx. 141 degrees C:
-
Press -> key.
-
Press keys 0 and 6 for "End data transfer" function and confirm input with Q key.
-
Switch ignition off.
-
Replace engine coolant temperature (ECT) sensor -G62-.
If display jumps to approx. -46 degree C:
-
Press -> key.
-
Press keys 0 and 6 for "End data transfer" function and confirm input with Q key.
-
Switch ignition off.
-
Check wiring using wiring diagram.
Continuation of check when display approx. 141 degree C:
-
Pull 4 pin connector -1- off engine coolant temperature (ECT) sensor -G62- -2-.
If display jumps to approx. -46 degree C:
-
Press -> key.
-
Press keys 0 and 6 for "End data transfer" function and confirm input with Q key.
-
Switch ignition off.
-
Replace engine coolant temperature (ECT) sensor -G62-.
If display remains at approx. 141 degree C:
-
Press -> key.
-
Press keys 0 and 6 for "End data transfer" function and confirm input with Q key.
-
Switch ignition off.
-
Check wiring using wiring diagram
Checking wiring