Cabrio GLX L4-2.0L (ABA) (2001)
Air Bag Control Module: Service and Repair
Airbag Control Module J234, Removing And Installing
NOTE:
-
Obtain radio code before disconnecting battery.
-
After connecting battery, vehicle options (radio, clock, electric window regulator) must be checked according to repair manual and/or user manual.
Removing
CAUTION: Before working on electrical system: Disconnect battery ground (GND) strap.
-
Remove center console.
-
Remove footwell vent.
-
If necessary, cut carpet and insulation mat in area of control module bracket as necessary.
-
Move bracket - 2 - in opposite direction of - arrow - and remove harness connector - 3 from control module - 1 -.
-
Remove nuts - 4 - and pull control module bracket from studs (nut - 4 - = 20 Nm).
Installing
-
Installation is reverse order of removal.
CAUTION: Make sure no one is in vehicle.
-
Switch on ignition.
-
Close doors.
-
Connect battery Ground (GND) strap