Cabrio GLX L4-2.0L (ABA) (2001)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor on Front Axle
Rotor
ABS System Components For Front Axle
Note:
^
Removing and installing ABS system components is identical for FS 1/1 and FN 3 brake calipers.
1. ABS wheel speed sensor
^
Before inserting sensor, clean mounting hole inner surface and coat with lubricant, G 000 650
2. Wheel bearing housing
3. Hex socket head bolt, 8 Nm (70 inch lbs.)
4. Splash shield
5. Hex bolt, 7 Nm (62 inch lbs.)
6. Wheel bearing
^
Replace each time after removing
7. Screw
8. Brake disc
9. Wheel hub with ABS wheel speed sensor rotor
10. Circlip
ABS Wheel Speed Sensor Rotor For Front Axle, Checking
-
Raise vehicle.
-
Remove wheel.
-
Rotate brake disc and check whether wheel speed sensor rotor is damaged or dirty,
-
If rotor is damaged, remove wheel hub with rotor and replace.
Rotor Runout, Checking
-
Raise vehicle.
-
Remove wheel.