Cabrio GLX L4-2.0L (ABA) (2001)
/Page-1387001.png)
Power Steering Pump: Service and Repair
Power Steering Pump, Removing and Installing
Pump In Lower Area
Power steering pump is not serviceable. If malfunction in pump is suspected, determine cause using pressure and leak tests; if malfunctioning replace
complete unit
Note:
^
Pumps supplied as replacement parts are not filled with oil. Therefore, fill pump with hydraulic oil Part No. Go 002 000 and rotate by hand,
otherwise pump may be damaged or noisy during operation.
^
Type of oil: hydraulic oil Part No. G 002 000
^
Oil system capacity: 0.7 - 0.9 liter (11.8 - 15.2 oz.).
Removing
-
Remove noise insulation.
-
Loosen belt pulley hex bolt,
Counter-hold with a hex key if necessary.
-
Turn tightening device in direction of arrow to relieve tension on ribbed belt.
-
Mark direction of ribbed belt rotation.
-
Remove ribbed belt.
-
Remove belt pulley hex bolt.