Cabrio GLX L4-2.0L (ABA) (2001)
Installing
-
Fill power steering pump with hydraulic oil, via Suction union.
-
Turn hub by hand until oil comes from pressure side.
-
Install power steering pump on bracket and tighten bolts to 25 Nm (18 ft lb).
-
Install suction hose and spring clip.
^
(Arrow A) must align with casting seam -arrow-.
^
ring clip must close off mark -arrow B-.
-
Install new O-rings on banjo bolt.
-
Tighten banjo bolt to 30 Nm (22 ft lb).
Continue installation in reverse sequence