Cabrio GLX L4-2.0L (ABA) (2001)
37. Breather cap
38. Breather
39. Breather pipe
^
Remove using pliers
^
Drive onto stop with drift VW 460/2
Fig. 1 Spring pins (arrows), removing and installing
Driving out
-
Only drive spring pin for engaging lever and spring pin for detent segment out far enough to remove selector shaft.
CAUTION!
^
Driving out pin from engaging lever may cause it to drop in planetary gears.
Driving in
-
Drive in spring pins until flush after inserting selector shaft, engaging lever and detent segment.
Fig. 2 Selector shaft with selector segments, removing and installing
Note:
^
With valve body installed be careful not to damage conductor strip.
-
Remove selector segment spring -A-.
-
Remove screw with washer (arrow),
Washer prevents selector shaft from moving.
Fig. 3 Guide plate and supporting plate, inserting