Cabrio GLX L4-2.0L (ABA) (2001)
/Page-1108001.png)
Clutch Slave Cylinder: Service and Repair
Removing and Installing
Special Tools
^
3309 Release tool
^
10-208 A Pliers
Removing
-
Remove intake hose -1- , connector -2- and hose -3- from Mass Air Flow (MAF) Sensor.
-
Remove bolts -4- and -5-.
-
Remove complete air cleaner housing. Refer to Powertrain Management.
-
Remove supply hose -A- from brake fluid reservoir and seal.
-
Pry clip -B- for pipe/hose assembly out from master cylinder.
-
Pull line/hose assembly -C- from master cylinder and seal.
-
Remove driver's side lower dash cover. Refer to Body and Frame.
