Cabriolet L4-1781cc 1.8L SOHC (JH) (1989)
/Page-906002.png)
location on fan shroud
^
mark and drill pilot holes for mounting
of relay socket
^
locate and disconnect connector TI of
right engine harness from TI connector of starter cable harness, which leads to starter solenoid circuit 50
^
route a 3.0 mm (12 AWG) wire from connector T1 of starter cable harness to relay socket cavity 8
^
install terminal Part No. N 017 494.7 on both ends of wire
^
insert wire/terminal into cavity 8 of relay socket and into connector housing, Part No. 111 971 921 B
^
insert new connector housing, Part No. 111 971 921 B, into connector T1 of starter cable harness leading to starter solenoid terminal 50
^
route a 3.0 mm (12 AWG) wire from battery positive cable to cavity 2 of relay socket
^
strip wire and crimp on a 6 mm ring terminal at battery end
^
strip other end of wire and crimp terminal, Part No. N 017 494.7, onto wire
^
insert terminal into cavity 2 of relay socket and mount ring terminal to 6 mm bolt of positive battery connector
^
route an 0.75 mm (18 AWG) wire from connector T1 of engine harness to cavity 4 of relay socket
^
strip wire and crimp terminal, Part No. N 017 460.6, to wire end leading to connector T1 and insert into connector housing Part No. 161 971 976A
^
insert new connector housing, Part No. 161 971 976A into connector T1 of engine harness
^
strip wire and crimp terminal, Part No. N 017 490.7 and insert into cavity 4 of relay socket
^
route 0.75 mm (18 AWC,) wire from cavity 6 of relay socket to negative battery cable (Ground) connection
^
strip wire and crimp terminal, Part No. N 017 490.7 and insert into cavity 6 of relay socket
^
strip wire and crimp 6 mm ring terminal and attach to negative battery cable (Ground) connection
^
install relay into relay socket and secure wiring with tie wraps to existing wire harness
^
mount relay socket oil radiator shroud with sheet metal screws (procure locally)
^
reconnect negative battery cable to battery
^
disconnect memory saver from cigarette lighter socket (if used)
^
re-code radio (if necessary)
Part Number
CAUTION
