Cabriolet L4-1781cc 1.8L SOHC (JH) (1989)
-
Set up dial indicator (3 mm range) and zero gauge with 1 mm preload
^
A = Shim, 0.65 mm
-
Move output shaft up and down and record dial indicator reading (example: 0.30 mm)
CAUTION: Do not turn the shaft during the measurement as this will cause the bearings to settle, which will result in an incorrect reading.
Available Shims
Determining thickness of shim S3
-
The correct thickness for shim S3 is determined by adding:
^
Specified bearing preload (a constant, 0.20 mm)
^
Measured axial play (example: 0.30 mm)
^
Test shim thickness (0.65 mm)
Example:
Inserted test shim (0.65 mm)
+ Reading from dial indicator (0.30 mm)
+ Preload (constant) (0.20 mm)
= Thickness of shim S3 -- (1.15 mm)
CAUTION: Part numbers are listed for reference only. Always check with your Parts department for the latest information.