CC (357) L4-20L Turbo (CBFA) (2011) - Seat Belt Systems & Child Restraint TSB
Child Restraint: Technical Service Bulletins
Restraints - Child Restraint LATCH(R) Compliance
00 10 06
September 30, 2010
2018263 Supersedes T.B. Group 00 number 00-06 dated September 8, 2000 to include additional models and model years
Vehicle Information
Condition
Child Restraint LATCH Guidance Fixture, Compliance with Federal Motor Vehicle Safety Standard 225 (USA Only)
Technical Background
Update to existing technical bulletin.
Production Solution
No production change required.
Service
Federal Motor Vehicle Safety Standard 225 requires that LATCH Guidance Fixtures be installed on vehicles equipped with built-in lower anchorages
when such vehicle is delivered or displayed to a customer.
Therefore, LATCH Guidance Fixtures (qty. 4) are supplied with the vehicle beginning August 30, 2000 production.
Vehicles with production date 09.00 (09/00) and later (see certification label on driver's side B-pillar-arrow- ) will be provided with the guidance fixtures
and must be checked for installation during the Pre-Delivery Inspection (PDI).
Note:
LATCH Guidance Fixtures may be removed temporarily if necessary, when removing the plastic seat covering during the PDI. However, they MUST be