CC (357) V6-3.6L (BLV) (2009)
Note:
Midtronics Battery Tester/Charger InCharge 940 to maintain vehicle battery voltage.
Note:
Battery MUST have a minimum no load charge between 12.5V and 14.5V (failure to maintain voltage during update process can lead to control
module failure and will not be covered under this Technical Bulletin).
^
VAS 5051B must be connected to vehicle and 110V AC power supply at all times during update programming
^
VAS 5052/A must be connected to vehicle and battery voltage requirements maintained
^
Any appliances with high electro-magnetic interference sources (e.g. mobile phones, Bluetooth) switched OFF
^
Install Battery Tester / Charger InCharge 940 onto vehicle
^
Select "Vehicle Self-Diagnosis" -arrow-
^
Select "On Board Diagnostic (OBD)" -arrow-, then select
arrow