Corrado L4-1781cc 1.8L SOHC SC (PG) (1990)
Front Door Exterior Handle: Technical Service Bulletins
Lock Cylinder, Outer Door Handle - Installation
Subject:
Lock Cylinder Installation, Outer Door Handle
Model(s): Corrado, Passat
Group:
57
Number:
90-01
Date:
Jul 31, 1990
Due to the incorporation of micro switches into the exterior door handles, a spring loaded centering pin has been added to the lock cylinder assembly.
Lock cylinder installation, door handle removed.
^
Pull door handle mechanism into release position. This will expose a 2.8 mm installation opening in the lock cylinder housing. Arrow
^
Insert lock cylinder into door handle. Carefully align centering pin opening in cylinder with installation opening in cylinder housing.
^
Insert centering pin spring into 2.8 mm opening. Arrow
^
Lubricate and place centering pin on top of spring.
^
Insert small punch into the 2.8 mm opening compressing the centering pin assembly until the lock cylinder can is fully seated.
^
Rotate seated lock cylinder 900 counter clockwise (Normal operating range).
^
Reattach locking paw and spring.