Corrado L4-1781cc 1.8L SOHC SC (PG) (1990)
- Pry off trim plate (5), remove screws (6).
- Pull out cassette storage box (7).
Instrument Panel Trim Plate, Removing
- Pull off temperature control knobs and sliding levers (arrows).
- Pry out trim plate (8), remove heating and ventilation controls.
- Unscrew multi-purpose screws (9) (operating switch removed).
- Unscrew multi-purpose screws (10) and pull out trim plate (11).
- Remove instrument panel cover and steering column switch.
- Pry off left/right caps (12) and unscrew left/right hex head bolts (13).
- Unscrew hex nut (14) (nut is in back of console).
- Unscrew hex nuts (15) (nuts are located in plenum panel and can only be seen with aid of mirror).
- Slightly pull off instrument panel, loosen cables and remove instrument panel.
Instrument Panel, Installing
- Install all components in reverse order of removal procedure, noting the following: