Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Front Door Hinge: Service and Repair
Door Hinges, Assembly Overview
NOTE:
-
The description applies to the right side. The left side is similar.
-
Bolts for door hinges must always be replaced after loosening.
1
-
Door
2
-
Upper part of door hinge
-
Hinge is divided
3
-
Socket head bolt
-
M8 X 24
-
Tightening torque: 20 Nm + 1/4 additional turn (90°)
-
Always replace bolts after loosening
4
-
Socket head bolt
-
M8x24
-
Tightening torque: 20 Nm + 1/4 additional turn (90°)
-
Remove when removing door
-
Always replace bolts after loosening
5
-
Lower part of door hinge with door arrester
-
Hinge is divided
6
-
Socket head bolt
-
M8x28
-
Installed from the vehicle interior
-
Remove lower A-pillar trim
-
Tightening torque: 20 Nm + 1/4 additional turn (90°)
-
Always replace bolts after loosening