Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Front Door Window Regulator: Service and Repair
Installing Window Regulator Motor
Installing Window Regulator Motor
-
Place window regulator motor - 1 - on and pull door window lightly up and down so that splines are located better between motor and cable drum.
Tightening torque: Window regulator motor bolts - 2 - 3.5 Nm.
-
Connect connectors - 3 -.
The window regulator loses its route after low voltage.
-
The roof is closed.
-
The door window is adjusted.
-
Let window regulator drive twice upward and downward to stop respectively. By doing so, the window regulator motor is now functional. Pinch
protection is activated.
-
Then, continue in reverse order of removal.