Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-3317001.png)
Hood Insulator / Pad: Service and Repair
Hood
Insulation
Removing
-
Using Pry Lever (80-200), pry out clips - 2 - from insulation - 1 -.
-
Remove insulation - 1 - from hood - 3 -.
Installation
-
Slide insulation - 1 - with mounting tabs into slot in hood - 3 -.
