Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Headliner: Service and Repair
Tensioned Headliner Rail, Installing
Tensioned Headliner Rail, Installing
NOTE:
-
All screws are microencapsulated and must always be replaced.
-
Sun shade is slide all the way forward.
-
Slide rail - 1 - in.
-
Install screws - 2 and 3 -, but do not tighten yet. Tightening torque for bolt: 4 Nm.
-
Pull rail in center down about 2 cm. This creates pretension on the rail so the sliding headliner can slide without dragging on the tensioned
headliner.
-
Tighten screws - 2 and 3 -. Tightening torque for bolt: 4 Nm.
-
Insert noted number of spacer plates and tighten screw - 4 -.