Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Lock Carrier: Procedures
Lock Carrier Service Position
Lock Carrier Service Position
=> [ Service Position, Setting ]
=> [ Service Position, Resetting ]
=> [ Pressure Hoses, Releasing ]
Service Position, Setting
‹› Minor changes to service position must be kept in mind, depending on engine version.
-
Remove front bumper cover, refer to => [ Front Bumper Cover ] See: Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and
Repair/Front Bumper Cover Overview.
-
On vehicles with a 6-cylinder fuel injection engine and HID headlamps, remove the headlamps.
-
Remove the noise insulation. Refer to => [ Noise Insulation ] See: Sound Proofing / Insulation/Service and Repair/Removal and
Replacement/Noise Insulation
-
In vehicles with charge air cooler, disconnect pressure hoses. Refer to => [ Pressure Hoses, Releasing ].
-
Release, disconnecting. Refer to => [ Release Coupling ] See: Doors, Hood and Trunk/Hood/Service and Repair/Hood
-
Remove screws - 3 - and disconnect air duct from lock carrier.