Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Roll Bar Cover: Service and Repair
Headrest Cover, Removing and Installing
Headrest Cover, Removing And Installing
NOTE: Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
-
Open roof completely.
-
Remove cover - 1 - up out of mounts - arrows -.
-
Disengage loop - 1 - from cover - 2 -.
Installing
NOTE: Before installing, check securing elements for damage and replace if necessary.
-
Installation is performed in the reverse order of removal.