Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Check Seating of Protective Caps
-
Protective cap must no longer be able to be pulled from brake caliper by hand.
-
Press the piston lightly against the protective cap and lock it into position, using the trim removal wedge (3049) - 2 -.
Do not angle piston, to avoid damaging the seal sleeve.
-
Blow the protective cap on with pressurized air (max. 3 bar) - 1 -. Protective cap springs on to piston.
-
Press piston into brake caliper using piston resetting tool (T 10145) - 1 -.