Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Open the bleeder valves in the prescribed sequence and bleed the brake calipers.
1- Left front brake caliper.
2 - Right front brake caliper.
3 - Left rear brake caliper.
4 - Right rear brake caliper.
Use a suitable bleeder hose. It must fit tightly on the bleeder valve so that no air can enter the brake system.
-
With the bleeder bottle hose attached, leave the bleeder valve open long enough that brake fluid exits without bubbles.
Post-Bleeding
A second mechanic is required to assist:
-
Press the brake pedal forcefully and hold.
-
Open the bleeder valve at the brake caliper.
-
Press the brake pedal down until stopped.
-
Close the bleeder valve with the pedal pressed.
-
Release the brake pedal slowly.
This bleeding procedure must be performed 5 times per brake caliper.
Bleeding Sequence
1- Left front brake caliper.
2 - Right front brake caliper.
3 - Left rear brake caliper.
4 - Right rear brake caliper.
A road test must be performed after bleeding. During this, at least one Anti-lock Brake System (ABS) stop must be performed!