Eos (1F7) L4-2.0L Turbo (BPY) (2007)
^
Do not interchange used bearing shells (mark)
Sensor wheel, removing and installing
-
Always replace sensor wheel - 2 - whenever bolts are removed - 1 -
Note:
^
After tightening a second time, the attachment point of the countersunk screws of the sensor wheel are so deformed that the screw heads lie on
the crankshaft - 3 - arrows - and the sensor wheel is loose underneath the screws.
^
Installation of the sensor wheel is only possible in one position, the bore holes are shifted.