Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-1029001.png)
Sealing Flange, Engine Front: Locations
Sealing flange, assembly overview
1. 90 Nm plus an additional 90° (1/4 turn)
2. Crankshaft toothed belt sprocket
3. 15 Nm
4. Seal
^
Do not additionally oil or grease sealing lip of sealing ring
5. Sealing flange on belt pulley side
^
Must be located on alignment pins
^
To remove and install, remove oil pan
6. Cylinder block
7. 60 Nm plus an additional 90° (1/4 turn)
^
Replace
8. Flywheel/drive plate
9. Intermediate plate
^
Must be located on dowel sleeves
^
Do not damage or bend when doing assembly work
10. Sealing flange with seal
^
Only replaced as complete unit
11. Diamond disc
^
Replace
