Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Remove the camshaft sprocket bolt.
-
To guide the seal puller, install (2085/2) into camshaft by hand until seated.
-
Remove the inner portion of (2085) two rotations (approximately 3 mm) from the outer portion and secure it with the knurled crew.
-
Grease the threaded head of (2085), position and forcefully screw it as far as possible into the oil seal.
-
Loosen the knurled screw and turn the inner part against the camshaft until the seal is removed.
Installing