Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-1238005.png)
-
Remove both lower mounting nuts of front exhaust pipe/turbocharger.
-
Remove bracket for exhaust system - arrows -.
-
Disconnect exhaust system at clamping sleeve - arrows -.
-
Disconnect front exhaust pipe from turbocharger and slide it toward rear slightly.
NOTE: Catalytic converter is not removed and oxygen sensor connector is not disconnected.
-
Remove oil supply line and coolant supply line at turbocharger - arrows -.
