Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Headlamp Control Module: Service and Repair
Headlamp Range/Cornering Lamp Control Module J745
Headlamp Range/Cornering Lamp Control Module J745
-
Headlamp Range/Cornering Lamp Control Module J745, removing and installing
-
Headlamp Range/Cornering Lamp Control Module J745, coding
-
Headlamp Range/Cornering Lamp Control Module J745, output diagnostic test mode
Headlamp Range/Cornering Lamp Control Module J745, removing and installing
Special tools, testers and auxiliary items required
-
Trim removal wedge VAS 3409
NOTE: When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ( trim
removal wedge VAS 3409, screwdriver) will be positioned, using commercially available adhesive tape.
Removing:
-
Switch off ignition, switch off all electrical components and remove ignition key.
-
Remove side cover -1- of instrument panel, do this by inserting trim removal wedge VAS 3409 or a screwdriver into recess -2- and pry off cover
-1- in -direction of arrow-.