Eos (1F7) L4-2.0L Turbo (BPY) (2007)
‹› Mounting tires (wheels with tire pressure monitoring system), refer to => [ Tires, with Tire Pressure Monitoring System ] See: Service and
Repair/Removal and Replacement/Tires, With Tire Pressure Monitoring System.
‹› Mounting tires with emergency running characteristics, refer to => [ Tires, with Run-Flat Tires ] See: Tires/Service and Repair/Tires, With
Run-Flat Tires.
6
Union Nut
‹› 8 Nm
7
Valve Cap
‹› Use only original valve caps from the repair set.
‹› Do not use Comfort valve caps and metal caps.
Tire Pressure Sensor
Tire Pressure Sensor
Removing
-
Remove the union nut - 1 -.
-
Remove tire pressure sensor - 2 - from rim well.
Installing
CAUTION!
‹› Clean the valve opening before installing the tire pressure sensors.
-
Insert the tire pressure sensor - 2 - with new seal and sealing washer and press it on the spots marked with the - arrows - into the disc wheel (rim).