Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Fuel Pressure Sensor: Service and Repair
Fuel Pressure Sensor
Special tools, testers and auxiliary items required
‹› Assembly Tool (T10118)
‹› Double Hexagon Socket, 1/2", 27 mm (VAS 5301/7)
CAUTION!
‹› Follow the safety measures for releasing the high side fuel pressure. Refer to => [ High Side Fuel Pressure, Releasing ] See: Fuel
Delivery and Air Induction/Fuel Filter/Fuel Pressure Release/Service and Repair.
‹› For safety reasons, interrupt the current supply to the fuel pump, refer to => [ Safety Precautions ] See: Fuel Delivery and Air
Induction/Service Precautions/Safety Precautions before opening the fuel system because the fuel pump is activated by the driver door
contact switch.
Removing
-
Remove the engine cover/upper air filter housing. Refer to => [ Engine Cover/Upper Air Filter Housing ] See: Fuel Delivery and Air Induction/Air
Cleaner Housing/Service and Repair/Engine Cover/Upper Air Filter Housing.
-
Remove the coolant pipe and oil dipstick guide tube from the intake manifold - arrows -.
-
Press the oil dipstick tube down and to the right - arrow -.
-
Disconnect the connector from the fuel pressure sensor (G247) using (T10118).