Eos (1F7) L4-2.0L Turbo (BPY) (2007)
^
Remove the left vacuum pipe fastener -arrow-
^
Remove the right vacuum pipe fastener -arrow-
^
Disconnect the vacuum pipe hose at the orifice -arrow- and remove pipe.
Installation
^
Install vacuum supply pipe Part No. 06F 133 778 B follow removal procedure in the reverse order, taking care to properly position hoses, pipe and
clamps in place.
^
Tighten vacuum pipe fasteners to 4 Nm (35 in.lbs.).
^
Clear codes and reset readiness code.