Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Connect a fuel line from the High pressure fuel gauge to the disconnected fuel return line and hold it in the measuring container.
CAUTION!
Danger of spraying when opening shut-off valve; wear protective goggles and protective clothing to prevent injuries and contact with
skin. Hold container in front of open connection of pressure measuring device.
-
Close the shut-off valve of High pressure fuel gauge.
-
Press switch on the Hand held remote control (jumper) while opening the shut-off valve slowly until 4 bar positive pressure is indicated on
pressure gauge. Do not change position of the shut-off valve.
-
Empty into the measuring container.
Delivery rate of the fuel pump is dependent on the battery voltage.
-
Operate the remote control for 30 seconds.
-
Using a Multimeter, check battery voltage while the fuel pump is running.
-
Compare the fuel quantity pumped with the specified value.