Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Carefully pull steering column electronic systems control module downward from steering column switches.
‹› Check whether all harness connectors are disconnected on the upper side, disconnect if necessary.
-
Disengage - arrow A - harness connector - 1 - and disconnect it from steering column electronic systems control module.
-
Remove securing latch - 3 - from harness connector.
-
Disengage lock - arrow B - on electrical connection - 2 - and disconnect from steering column electronic systems control module.
Installing:
Install in reverse order of removal, noting the following:
‹› Make sure the pins are not bent and that the connector audibly engages.