Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Headlamp Switch: Service and Repair
Light Switch E1, Removing And Installing
The following components are integrated with Light Switch E1:
-
Fog Lamp Switch E7
-
Rear Fog Lamp Switch E18
-
Headlamp Switch Illumination L9
Removing:
-
Turn off the ignition and all electrical components.
-
Turn light switch rotary knob to "0" position.
-
Push in light switch rotary handle -1- and turn it slightly toward right -2-.
-
Hold rotary handle in this position and remove light switch on rotary handle from instrument cluster -3-.
-
Disconnect electrical connection -arrow-.
Installing:
-
Connect the connector to the light switch.
-
Hold light switch firmly and press in rotary handle of light switch -1- and turn slightly toward right -2-.
-
Hold rotary handle in this position and insert light switch into instrument cluster -3-.
-
Turn rotary handle to position "0", release and engage switch.