Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Connect the (VAS 5570) to the fuel pressure sensor - 1 - and the electrical connector for the fuel pressure sensor.
-
Install the engine cover/upper air filter housing and connect the Mass Airflow (MAF) sensor (G70).
-
Turn the (VAS 6394/1) on by pressing the button - A - briefly.
‹› Holding the button - A - for 2 seconds switches on the illumination for 20 seconds.
‹› If the (VAS 6394/1) does not display 0 bar, set it back to zero, refer to the operating instructions.
-
Connect the vehicle diagnostic tester to the vehicle's diagnostic connector.
-
Turn on the ignition.
-
Press the following buttons on the vehicle diagnostic tester screen one after another.
Vehicle Self Diagnosis
On Board Diagnostic (OBD) >