Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Remove the lock cylinder - 1 - from the steering lock housing.
Installing:
-
Disconnect harness connector - arrow - at induction coil.
‹› To improve clarity, the ignition key is not shown in the following illustration.
-
Insert the ignition key into the lock cylinder - 1 - and turn it to the Run position.
-
Using the steel wire - 2 -, release - arrow - the retaining lever - 3 - of the lock cylinder - 1 -.
-
Connect the immobilizer induction coil connector.
-
Insert the lock cylinder - 1 - into the steering lock housing.
‹› Connection of induction coil for anti-theft immobilizer must be inserted into guide on steering lock housing.
-
Pull the steel wire - 2 - out of the lock cylinder - 1 - and verify that the lock cylinder is securely seated in the steering lock housing.