Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Positive: Service and Repair
Starter Wire (B+ Wire)
-
Starter wire (B+ wire), removing and installing
-
External starting point with Suppressor C24
-
Battery Interrupt Igniter N253
Starter wire (B+ wire), removing and installing
Assembly work in luggage compartment
The starter wire (B+ wire) -1- is routed from the starter batteries in the luggage compartment, through an opening in the body on the left side of the
luggage compartment floor, forward to the engine compartment, location.
-
Disconnect wiring connection on Battery Interrupt Igniter N253 -1-.
-
Usage and safety information for working on Battery Interrupt Igniter N253
-
Battery Interrupt Igniter N253 components and component locations
The starter wire -2- is secured in the luggage compartment floor with a clip -3-.
Assembly work on vehicle underbody
-
Remove underbody trim, Underbody trim, removing and installing.
The starter wire (B+ wire) -3- is secured directly behind the body grommet on the luggage compartment floor -4- with a bracket and a rubber
buffer -2-.
The bracket securing nuts -5- are tightened to 5 Nm.
-
Arrow 1 - points in direction of travel.
Assembly work in engine compartment
External starting point with Suppressor C24, removing and installing.
Starter wire on starter, removing and installing.