Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Starter Motor: Service Precautions
Starter
Application and safety notes:
CAUTION:
If assembly work is performed on starter, note the following:
-
Switch off ignition, switch off all electrical components and remove ignition key.
-
Disconnect battery.
When disconnecting and connecting battery, the procedure must be followed as described.
DTC recognition and display:
For fault-finding, use the vehicle diagnosis, measurement and information system VAS 5051A, and the function "Guided fault finding".
NOTE: Wiring diagrams.
Description of work:
-
Starter B, checking
-
Starter - vehicles with manual transmission, removing and installing
-
Starter, removing and installing, direct-shift transmission (DSG)
-
Tightening Torques: Starter