Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-2344008.png)
‹› All hose connections for charge air system are secured by spring-type clamps or by connector couplings. The following must be observed with
connector couplings:
‹› Release connection by pulling locking clip - arrow -.
‹› Disconnect hose/pipe without tools.
-
Remove charge air hose 2 and charge air pipe 1.
-
Remove lower starter mounting bolt - arrow - (M10= 40 Nm, M12= 80 Nm).
