Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Steering Angle Sensor: Removal and Replacement
Steering Column Switch Components, To 10.09
Steering Angle Sensor
CAUTION!
The removal and installation of individual steering column switch components must be done in the specified sequence, refer to => [
Steering Column Switch Components Removal Sequence ]. See: Lighting and Horns/Sensors and Switches - Lighting and Horns/Combination
Switch/Service and Repair/Steering Column Switch Components, to 10.09/Steering Column Switch Components Removal Sequence
Removing:
-
Remove Steering Angle Sensor (G85) - 1 - toward rear from steering column switches - arrow -.
Installing:
Install in reverse order of removal.