Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Carefully release the over center spring.
-
Pivot the mounting bracket to the original position again and remove the over center spring.
Installing
‹› Clutch pedal is disconnected from the master cylinder.
-
Carefully mount the lower area of the clutch pedal in a vise with protective jaws.
-
Install the over center spring into the mounting bracket.
-
The mounting area - arrow - for the clutch pedal pivot - A - must be positioned vertically.
-
Install the (T10178) in the center area of the over center spring and pivot the mounting bracket on.
-
Compress the over center spring - arrow 1 -.