Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-2035002.png)
B - = Spacer, approx. 20 mm high, e.g. socket insert SW 10 for 1/4" drive.
-
Install 3 nuts - C - on bolts - A -.
-
Place pressure plate on workshop press so that only 3 bolt heads - arrows - touch surface.
-
Center thrust pad 3062 on middle of pressure plate.
Do not use excessive force for the following procedure, otherwise the adjusting ring forks may break off
