Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Fluid - M/T: Service and Repair
Transmission oil, checking 02Q, 6 Speed M/T
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1331
^
Triple square socket driver 3357
-
Remove noise insulation.
-
Remove sealing plug for gear oil inspection - arrow -.
The oil level is correct when transmission is filled up to lower edge of filler hole.
-
Install bolt - arrow - with new sealing ring.
-
Tighten bolt - arrow - to tightening torque.
When filling again, note the following:
-
Remove bolt - arrow -.
-
Top off oil to lower edge of filler hole.
-
Install bolt - arrow - with new sealing ring.
-
Tighten bolt - arrow - to tightening torque.
-
Install noise insulation.