Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-2106029.png)
-
Install the shaft lever and tighten the nut to 20 Nm.
Selector shaft lever fits onto the splines only in one position.
-
Install the selector lever cable to the transmission. Refer to => [ Selector Lever Cable, through 02.2009 ] See: Shift Linkage/Shift Cable/Service
and Repair/02E Transmission (Direct Shift Gearbox) and adjust.
