Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Slide spray nozzle holder into lift cylinder until it engages.
-
Install cover cap onto the spray nozzle holder and let down lift cylinder.
-
Check cover cap for correct seating on bumper cover.
-
Adjust the cap if necessary by shifting the spray nozzle holder into a higher or lower catch on the lift cylinder.
-
Bleed headlamp washer system after completing assembly work. Refer to => [ Headlamp Washer System, Bleeding ] See: Service and
Repair/Procedures.
-
Check the spray nozzles for the headlamp cleaning system and adjust if necessary.